Dragonborn Claws

3D MODEL DESCRIPTION

Forged in chaos for those who don't just survive the battle, they own it.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 15 Hours, 13 Minutes*  (may vary according to you printer model)                         
• Approximately Height: 5,0 cm

*Note: Printing time based on a Bambu P1S printer, according to our tests.

*Note: We do not recommend the use of SILK filaments for this piece. The piece contains fittings and joints, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-Type filament is at your discretion.

ATTENTION: You should make the "Fit Test Rings" for each finger before printing the final piece, this way you will avoid waste. More information in the "How to Slice" video.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!